| |
Synergistic Training program Utilizing the Scientific and Technological Infrastructure (STUTI)
|
|
| |
IIT Indore
|
|
|
Sr no
|
Complete name
|
Present designation
|
Name of Institute/Organization
|
Mobile Number
|
Age
|
Gender
|
Motivation for attending STUTI Program on Advances in Gear Engineering
|
Details of experience and/or publications relevant to Gear Engineering (if any)
|
|
1
|
Bijal Subhashchandra Khamar
|
Assistant Professor
|
G H Patel College of Engineering and Technology, Anand
|
9.88E+09
|
43
|
Female
|
I am doing PhD in application of Mathematics in Mechanical Engineering from CVM university and my subject of research is Dynamic modeling of Gearbox in presence of Multiple faults. To understand Gear dynamics and importance of condition monitoring in better way this workshop must be helpful for my further research work.
|
Still I am beginner in this field of reserch so no publication till now.
|
|
2
|
Sibi Chakaravarthy R
|
Assistant Professor
|
VIT Vellor
|
8.22E+09
|
24
|
Male
|
I am doing PhD on surface modification of materials, focused on improving the materials mechanical properties by using Laser shock peening(LSP). This program will help me for getting a better understanding on the gear failures and how it can be resolved and how LSP is going to help.
|
|
|
3
|
Dr. Vineet Dubey
|
Assistant Professor
|
Manav Rachna University, Faridabad
|
7.38E+09
|
32
|
Male
|
I am actively doing my research work in minimum quantity lubrication (MQL) machining. Will get an opportunity to learn various advanced technologies in machining of gears and can get in-depth knowledge of different gear manufacturing techniques which will aid in carrying out research work in the area of gear engineering.
|
1 month Industrial training at Scooters India Limited, Lucknow where traditional techniques were used for gear manufacturing.
|
|
4
|
Jay Airao
|
PhD Scholar
|
IIT Ropar
|
6.28E+09
|
28
|
Male
|
Since my research area is machining, this course on gear manufacturing would be beneficial in understanding the manufacturing and post processing of the gears. Thus, I would like to attend this course.
|
I do not have the publication in gear engineering. However, I have publications in the machining. Below link is shown for the publication details:https://scholar.google.com/scholar?hl=en&as_sdt=0%2C5&q=jay+airao&oq=
|
|
5
|
Saurabh Tiwari
|
PhD Scholar
|
IIITDM Jabalpur
|
9.58E+09
|
30
|
Male
|
I am doing research in the field of conditional monitoring with MQL for the sustainable manufacturing. The content of this program will strengthen my research work to contribute in the field of gear engineering.
|
|
|
6
|
Rajesh S
|
PhD Scholar
|
SASTRA University, Thanjavur
|
9.6E+09
|
30
|
Male
|
My research work is to determine the contact and bending fatigue failure of asymmetric helical gear drives through finite element analysis. Further, the fatigue life of the helical gear and pinion has been balanced by optimizing the novel rack cutters. By modifying the tooth profile of the helical gear will enhance the fatigue life and increases the load carrying capacity for the customized power transmission system. The future research plan will be extended to carry out experimental work based on asymmetric helical gear and novel rack cutter to estimate the fatigue life. Further, the influence of secondary operations, such as surface treatments on the novel helical gear drives, needs to be investigated.
Attending the STUTI program on “Advances in Gear Engineering” will support me to carry out my future research on gear drives.
|
I have worked as a Junior Research Fellow on the project titled “stress analysis of high contact ratio spur gear” sponsored by “Gas Turbine Research Establishment (GTRE)”, DRDO, Bengaluru, Karnataka.
Now I am pursuing Ph.D. in the domain of gear design and failure analysis in SASTRA Deemed to be University, Thanjavur, Tamil Nadu.
Publications:
S. Rajesh, P. Marimuthu, P. Dinesh Babu, R. Venkatraman, Contact fatigue life estimation for asymmetric helical gear drives, Int. J. Fatigue. 164 (2022) 107155. https://doi.org/10.1016/j.ijfatigue.2022.107155.
S. Rajesh, P. Marimuthu, P. Dinesh Babu, Optimization of contact stress for the high contact ratio spur gears achieved through novel hob cutter, Forsch. Im Ingenieurwes. 86 (2022) 123–131. https://doi.org/10.1007/s10010-022-00577-z.
S. Rajesh, P. Marimuthu, P. Dinesh Babu, Contact and bending load capacity enhancement through high entropy alloys, IOP Conf. Ser. Mater. Sci. Eng. 624 (2019). https://doi.org/10.1088/1757-899X/624/1/012029.
|
|
7
|
Rohit Singh Chauhan
|
B.Tech student
|
Government Engineering College, Mainpuri
|
7.91E+09
|
24
|
Male
|
Want to learn practically about gears and gear technology. I have done diploma in mechanical engineering and also have 1 year experience from Hindustan aeronautics ltd bangalore
|
|
|
8
|
Aditya Agrahari
|
B.Tech student
|
Rewa Enginering College, Rewa
|
|
20
|
Male
|
Keenly want to learn different aspects of gear engineeirng
|
|
|
9
|
Sanskar Agarwal
|
B.Tech student
|
Rewa Enginering College, Rewa
|
|
21
|
Male
|
Learn gear engineering aspects
|
|
|
10
|
Abhishek Upadhyay
|
B.Tech student
|
Rewa Enginering College, Rewa
|
|
21
|
Male
|
Practical exposure to gear engineering
|
|
|
11
|
Shivam Asati
|
Design Executive
|
Comptron Greaves, Bhopal
|
9.75E+09
|
26
|
Male
|
Designing and Development of Gear boxes, gear ratio, pinions, gears required for manufacturing Train 18, Vande Bharat, MEMU, ACEMU.
|
Currently Working in Traction Motor Division of CG Power and Industrial Solutions Pvt. Ltd since 3.5 Years
|
|
12
|
Sunil Aundhekar
|
AGM
|
Tafe Motors and Tractors Ltd, Bhopal
|
9.88E+09
|
50
|
Male
|
|
|
|
13
|
Umesh Mohan
|
Deputy Manager
|
Tafe Motors and Tractors Ltd, Bhopal
|
9.98E+09
|
42
|
Male
|
|
|
|
14
|
Mr. Sainath Nagnath Mukta
|
Assistant Manager
|
Tafe Motors and Tractors Ltd, Bhopal
|
9.03E+09
|
36
|
Male
|
|
|
|
15
|
Bhushan Bhikaji Dhopavkar
|
Dy Manager
|
VECV Dewas
|
9.77E+09
|
40
|
Male
|
|
|
|
16
|
Rajesh Kestwal
|
Manager
|
VECV Dewas
|
9.48E+09
|
46
|
Male
|
|
|
|
17
|
Ravi Sharma
|
Manager
|
VECV Dewas
|
9.83E+09
|
35
|
Male
|
|
|
|
18
|
Deepak Tiwari
|
Deputy Manager
|
VECV Pithampur
|
7.87E+09
|
34
|
Male
|
|
|
|
19
|
Shivnarayan Kushwah
|
Junior Manager
|
VECV Pithampur
|
9.93E+09
|
25
|
Male
|
|
|
|
20
|
Abhishek Paliwal
|
Maintenance Manager
|
Rajratan Global Wire, Pithampur
|
7.77E+09
|
34
|
Male
|
|
|
|
21
|
Ashish Kumar Ahirwar
|
Senior Engineer
|
Rajratan Global Wire, Pithampur
|
8.35E+09
|
24
|
Male
|
Gain knowledge of Gearbox assembly
|
|
|
22
|
Amit Gour
|
Dy. Manager
|
Bridgestone India, Pithampur
|
9.93E+09
|
40
|
Male
|
Gain knowledge in Advanced gear technuologies
|
15 years
|
|
23
|
Akhilesh Shrivastava
|
Sr. Engineer
|
Bridgestone India, Pithampur
|
9.83E+09
|
49
|
Male
|
Understantd different gear technologies
|
26 years
|
|
24
|
Rameshwar Kose
|
Dy. Manager
|
Bridgestone India, Pithampur
|
9.83E+09
|
55
|
Male
|
Intersted in Gear Technology
|
26 years
|
|
25
|
Sandeep Gour
|
Junior Technical Superintendent
|
IIT Indore
|
9.83E+09
|
33
|
Male
|
My research work during my MTech program (completed from IIT Indore) was "Investigations on Near-Net Shape Manufacturing of Elliptical Helical Gears by Wire Spark Erosion Machining Process", in which I manufactured different types of non-circular gears also, and optimized the process parameters of WSEM process. Presently I am working on other non-circular gear manufacturing processes. My future plan is to work on the effective manufacturing of micro circular as well as micro non-circular gears. This program will be very helpful for me to gain knowledge in the field of Gears and to achieve my future goals.
|
1. 10 years of working experience in the Center of Excellence in Gear Engineering of IIT Indore.
2. MTech Thesis on "Investigations on Near-Net Shape Manufacturing of Elliptical Helical Gears by Wire Spark Erosion Machining Process".
3. Accepted chapter abstract for the book titled "Innovative Development in Micro-manufacturing Processes".
|
|
26
|
Pallavi Gautam
|
PhD Scholar
|
IIT Indore
|
8.84E+09
|
32
|
Female
|
I am working on condition monitoring of gear transmission system. so this course would be helpful in introducing the advancement in the field and update me with the current state of art techniques in the feild.
|
Nil
|
|
27
|
Yogesh Sahebrao Andhale
|
PhD Scholar
|
IIT Indore
|
7.08E+09
|
35
|
Male
|
|
|
|
28
|
VIPIN GOYAL
|
PhD Scholar
|
IIT Indore
|
9.41E+09
|
32
|
Male
|
It may use in my research as well as enhance my technical knowledge.
|
MO
|
|
29
|
Arun Kumar Singh
|
JRF
|
IIT Indore
|
7.98E+09
|
34
|
Male
|
Before joining here, I was working as an Assistant Professor from last six year where I taught "Design of Machine Component" in which design of different types of gear also taught that's why I want to join this program.
|
|
|
30
|
Ramanand dadhich
|
PhD Scholar
|
IIT Indore
|
8.35E+09
|
31
|
Male
|
want to learn fundamental concepts of gear manufacturing, maintenance and fault diagonsis
|
|
|
31
|
Mahesh Patel
|
Post Doctal Fellow
|
IIT Indore
|
8.23E+09
|
31
|
Male
|
As mechanical engineering and metallurgist, I am very curious about functioning and modifications of gear
|
|
|
32
|
Rajnish Prakash Modanwal
|
PhD Scholar
|
IIT Indore
|
7.36E+09
|
29
|
Male
|
|
|
|
33
|
Sumit Chorma
|
PhD Scholar
|
IIT Indore
|
9.62E+09
|
28
|
Male
|
|
|
|
34
|
Sandip Wankhede
|
Manager, Testing and Validation
|
Tafe Motors and Tractors Ltd, Bhopal
|
9.42E+09
|
43
|
Male
|
|
|
|
35
|
Mr. Saurabh Rajendra Lanjewar
|
Asst Manager
|
Tafe Motors and Tractors Ltd, Bhopal
|
8.37E+09
|
33
|
Male
|
|
|
|
36
|
Atul Dongre
|
Assistant Manager
|
Tafe Motors and Tractors Ltd, Bhopal
|
9.98E+09
|
38
|
Male
|
|
|
|
37
|
Ashok Kumar Ray
|
Deputy Manager
|
VECV Pithampur
|
9.11E+09
|
40
|
Male
|
|
|
|
38
|
Tapan Raj Chouhan
|
Dy Manager
|
VECV Pithampur
|
7.39E+09
|
40
|
Male
|
|
|
|
25
|
Deepansh Gill
|
Post Graduate Engineer Trainee
|
VECV Pithampur
|
8939601770
|
25
|
Male
|
|
|
|
40
|
Deepak Malviya
|
Assistant Manager
|
VECV Pithampur
|
9.76E+09
|
34
|
Male
|
|
|
|
41
|
Soma V.B. Reddy
|
Deputy Manager
|
VECV Pithampur
|
7.53E+09
|
24
|
Male
|
|
|
|
42
|
Rishi Raj Verma
|
Manager
|
VECV Pithampur
|
7.34E+09
|
35
|
Male
|
|
|
